Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 42)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
24
Review the following for additional information:
Author Determines the name used as the creator of new files and the person
who last edited the file. See Summary Information in ProcessBook
(page 59) for more information. This field is blank by default when
FactoryTalk Historian ProcessBook is first installed on a computer.
Startup File The file name and path in this field determine which, if any, file is
automatically opened when the application is launched. The default
value when FactoryTalk Historian ProcessBook is first installed is
<installation path>\procbook\pidemo.piw
.
Library File The file name and path in this field determine which, if any, file is
opened when the original symbol library command is used. The
default value when FactoryTalk Historian ProcessBook is first installed
is <installation path>\procbook\symlibry.piw.
Prefer Run Mode Determines whether ProcessBook starts up in Run mode or Build
mode by default. By default, this option is enabled when FactoryTalk
Historian ProcessBook is first installed on a computer.
Create Backup
Files Determines whether backup files (with a .bak extension) are
automatically created when a FactoryTalk Historian ProcessBook file is
opened. By default, this option is turned off when FactoryTalk
Historian ProcessBook is first installed on a computer.
Retain snapshot
values on updating
plots
Determines whether the archive event pipe is used for updating
trends, discarding any snapshot values between stored, archive
values. This setting is stored as PB2TraceCompatibility in the
[STARTUP]
section of your procbook.ini. By default, this option is
turned off when FactoryTalk Historian ProcessBook is first installed on
a computer.