Use the scrolling time range – Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide User Manual
Page 221

6
●
Work with Symbols
●
●
●
●
●
203
3. Select new starting and ending times from the drop-down lists or
define your own starting and ending times. Time ranges can be
relative, absolute, or combined.
4. Click OK. The selected elements change to reflect the new time range.
Use the Scrolling Time Range
To use the scrolling time range:
1. In Run mode, select the dynamic symbol or symbols for which you
want to change the time range. If no symbols are selected, the time
range change affects all dynamic symbols in the display.
2. On the Time Range toolbar, click the forward or backward Scroll
Time button, or
Click and drag the Scroll Time slider, or
Click the space on either side of the Scroll Time slider to increment or
decrement by a time span.
If the slider is dragged, a ToolTip is updated with the end time that is
applied when you release the mouse button.
3. Release the mouse button. Selected symbols are refreshed with the
new time range.
You can scroll the time for all items in a display or selected items. If no
trend is included in the selected items, the scroll buttons are disabled.