Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 325)

10
●
Installation
●
●
●
●
●
307
If you have FactoryTalk Historian BatchView installed on your system,
Setup installs a FactoryTalk Historian ProcessBook Batch group symbol
that is compatible with the current version of FactoryTalk Historian
ProcessBook. You can also install FactoryTalk Historian BatchView after
installing FactoryTalk Historian ProcessBook, and the correct Batch Trend
symbol is loaded.
FactoryTalk Historian sqc is installed with FactoryTalk Historian
ProcessBook.
Installation Test
You can view the results of the installation process by examining the setup
log, fth_installer.log, saved under the following location:
C:\Program Files\Rockwell Software\FactoryTalk
Historian\Installation Manager\<Name of the Historian
suite>\FTHInstallerLogs\<Date and Time of the Installation>.
This log also contains information pertaining to the directory structure,
node, .dlls, user name, and installation of various FactoryTalk Historian
ProcessBook files. If the log file is not found in the \PIPC\Dat folder,
look in the root directory of your system drive (e.g., C:\).
Once you install FactoryTalk Historian ProcessBook, you can see the
words Rockwell software on the Windows Start menu under Programs. At
this point, you are ready to use FactoryTalk Historian ProcessBook.
Call Rockwell Automation (page 349) if you experience problems with
your software.
Installed Files
Upon completion, Setup installs FactoryTalk Historian ProcessBook under
the root directory \PIPC.