Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 206)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
188
6. Click OK to add the symbol to your display.
Symbol Library Options
To configure a symbol options:
1. In the Symbol Library (page 187) dialog box, click a symbol in the
selection of symbols in the right-hand side of the dialog box, and click
Options.
-or-
Right-click the symbol and click Symbol Options. The Symbol
Options dialog box appears.
2. Review the following for additional information:
Fill Mode Controls the way the image is drawn. Options include
Original, Shaded, Solid or Hollow.
Fill Color Click the color box to change the fill color.
Flip Select Horizontal, Vertical, or Both to change the
orientation of the symbol. The default setting is None. This
setting returns the symbol to its original position.