Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 34)

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
16
You can configure toolbars to display as view-only to omit unnecessary
buttons. View-only toolbars and others can be specified in procbook.ini
(page 315).
Add Buttons to Toolbars
You can change the icons that appear on the toolbars or create your own
custom toolbar.
1. Click View > Toolbars.
2. From the Commands tab of the Toolbars dialog box, you can select a
particular toolbar in the dialog box and drag buttons to existing
toolbars in your FactoryTalk Historian ProcessBook window.
3. While the Commands tab is open, you can also drag buttons off of a
toolbar to remove them from your window.
Browser Toolbar
The Browser add-in provides a toolbar that resembles the controls of a
typical web browser. The toolbar is automatically loaded when you install
FactoryTalk Historian ProcessBook, and allows you to navigate recently-
used ProcessBooks and displays.
Browse ProcessBooks and Displays
1. To use the Browser and Playback toolbar:
2. Click View > Toolbar Manager. The Browser and Playback
toolbars appear.
These toolbars are open by default when you first launch FactoryTalk
Historian ProcessBook.