Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 49)

2
●
FactoryTalk Historian ProcessBook Essentials
●
●
●
●
●
31
Review the following for additional information:
Display Check or clear these options to configure what information a trend
displays by default.
 AutoScale
Select this check box if you want trends to be scaled as tag values
change over time. If you do not select this check box, then trends
use the Database scale for each tag.
 Plot Title
Select this check box if you want a title to display.

Value Scale Inside Axis
Select this check box to display the numeric scale inside the axis.
If you do not select this check box the scale displays outside the
axis. Note that the value scale is drawn horizontally when the
trend orientation is vertical.
 Grids
Select to display grid lines (page 123).
 Multiple Scales (page 125)
Add a value scale for each data point when selected. When the
check box is cleared, only a single value scale appears.
 Markers
Select the check box if you want markers to indicate data points
on the trend. If you do not select the Markers check box three
markers display on each line. These markers help you match a line
to a tag.
Legend Select or clear these options to configure what information appears in
the trend legends. The information that can fit in the legend is
determined by the size of the trend. Consequently, not all of the
information in the legend may be visible:

If the width of the legend is more than the width of the trend the
legend does not appear.
 If the height of the text in the legend is longer than the total
height of the trend, items are removed in this order: engineering
units, tag name, then value.
Options include:
 Tag Name
 Server Name (for FactoryTalk Historian tags)
 Value
 Description
 Eng Units