Filters – Banner PresencePLUS Pro COLOR—PROII Camera User Manual

Page 102

Advertising
background image

Graph Tab

When Edge Strength is selected in the Input tab, the software displays the Graph tab. This tab provides similar

information to the Input tab, but displays separate Edge Profile and Edge Strength graphs for easier viewing.
The Edge Profile graph represents the absolute gray scale level across the tool ROI.

The Edge Strength graph represents the change in gray scale along the tool R

OI. Edge Strength detects an edge when

the rate of change (solid red line on the graph) crosses the selected intensity change amount (dashed green lines on

the screen).

A bright-to-dark transition has a negative edge strength value, and a dark-to-bright transition has a positive edge

strength value. When the Edge Strength level is adjusted, both the negative and positive green dotted lines will adjust

together.

Filters

Increases in increments of 4 pixels (for example, 1, 5, 9, 13, ...) up to the total FOV size.

Some things to note:

ROI Width

• Narrow ROIs execute faster but could miss the part.
• Wide ROIs are more consistent but don't execute as fast.
• The ROI must be 13 pixels or wider to calculate the rotation of a part.

Runs a rolling average along the ROI length. It filters out sharp changes in the edge profile.

Smoothing

Note:

A high filter number may miss the edge of a narrow line.

Banner Engineering Corp.

Minneapolis, MN USA

102

2/2010

PresencePLUS Software Tools

Advertising