Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 351)

10.13.2 Playback
The Playback feature is available whenever the vision sensor is in Run mode but the Start button has not been pushed.
To enter Playback mode on a currently running sensor, hit the Stop button. Clicking on the Playback tab will bring up
the screen shown below left. This screen is almost exactly the same as the Record screen shown earlier: the only
differences are the title of the tab and the fact that the Record button is inactive.
There are three steps to playing back bitmap images using this feature:
351 Minneapolis, MN USA Banner Engineering Corp.
Run Screen 2/2010