Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 334)

Note:
Before entering the Run screen, a pop-up prompts the user to save the inspection. Save the inspection to
one of the memory locations on the Sensor. As an alternative to teaching, enter judgment tolerances in the Results
tab in the Test tool, and run the inspection without teaching.
9.3.1 Teaching an Inspection
Teaching on a number of known good samples finds acceptable variations and automatically sets the judgment tolerances
to accommodate the full range of acceptable results.
Several Teach parameters may be selected in the Teach tool’s Teach tab, such as how many images to consider during
a teaching session and what type of captured images to display.
Description Teach Screen Field/Button
• Use All to not limit the Teach sample size. All is the
default.
• Use Count to have the Sensor automatically stop the
Teach process after a set number of samples.
Use the Count option when there is a known sample set
size. Use the arrows to increase or decrease the sample
size. When the sample size is reached, the Sensor will
Banner Engineering Corp. Minneapolis, MN USA 334
2/2010 Teach