Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 248)

set ocvtool 2 "foobar"
To get the constant of the second ocvtool, issue the following command:
get ocvtool my_ocv_tool_2
Get Command Example
or
get ocvtool 2
7.6 Analysis Tools
Analysis tools analyze the information gathered with the Vision tools to create measurements and tolerances for the
Vision tools.
Analysis Tools
BCR/BCR
1.3 GEO/GEO
1.3 EDGE/EDGE
1.3 AREA/AREA1.3 OMNI/OMNI
1.3 OMNI
Color ProII/ProII
1.3 ProII
Color Location
Tools
No No No No Yes Yes Yes Yes
Coordinate
Tool
on
page 263
Yes Yes Yes Yes Yes Yes Yes Yes
Communication
Tool
on
page 248
Yes Yes Yes Yes Yes Yes Yes Yes
Math Tool
on page 267
Yes Yes Yes Yes Yes Yes Yes Yes
Measure
Tool
on
page 272
Yes No No No Yes Yes Yes Yes
String Tool
on page 294
Yes Yes Yes Yes Yes Yes Yes Yes
Test Tool
on page 301
7.6.1 Communication Tool
The Communication tool is used to conditionally export data from the Sensor to an external device. Results from
Vision tools can be selected by the Communication tool and exported to an external device. The Sensor can export
data over the Ethernet or via its serial channels.
Examples of exported results
• Execution times
• Whole-number counts
• Input and output values from a Test tool
• Success from Locate and Test tools
• Reference point-to-edge and rotation distances
Fields
Banner Engineering Corp. Minneapolis, MN USA 248
2/2010 PresencePLUS Software Tools