Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 326)

Comments Optional
Qualifiers Required
Qualifiers Support Actions Object or
Activity
Identifier System Object,
Component, or
Activity
If no qualifiers are
specified, a 30
Timeout (msec)
or None
EXEC TRIGGER
Trigger
second timeout is
used.
NOWAIT
By default, a 30
second timeout is
used.
Timeout (msec)
or
NOWAIT
Numeric Inspection
ID
EXEC PRODCHANGE
Product Change
Reset either the
System Error Flag,
None
SYSERRFLG
or
EXEC RESET
Counter or Flag
Reset
Pass and Fail
PASSFAILCNT
counters, or
Missing Trigger
count.
or
MISSTRIGCNT
Enables remote
teach. If no
TRIGGER
or
TRIGGER
None
EXEC RTEACH
Remote Teach
qualifiers are
NOWAIT
or
specified, remote
TRIGGER
Timeout (msec) teach will occur on
the next trigger. If
TRIGGER
qualifier is
specified, remote
teach will occur
immediately, and
the command will
block until a
default 30-second
timeout expires. If
TRIGGER
NOWAIT is
specified, remote
teach will occur
immediately, and
the command will
return right away.
If a timeout value
is specified, the
command will
block until the
specified timeout
expires.
Retrieve the sensor
online status.
None None
GET ONLINESTS
Online Status
Returns 1 if the
camera is ready, 0
otherwise
None None
GET READYFLG
Ready State
Banner Engineering Corp. Minneapolis, MN USA 326
2/2010 Communication Tool Setup