Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 322)

Note:
The following addresses are defaults.
Port Default IP Address Socket
20000 192.168.0.1 1
20001 192.168.0.1 2
20002 192.168.0.1 3
20003 192.168.0.1 4
20004 192.168.0.1 5
20005 192.168.0.1 6
20006 192.168.0.1 7
20007 192.168.0.1 8
20008 192.168.0.1 9
20009 192.168.0.1 10
8.2 Serial Connection
The sensor has a single serial connection that you can configure, Serial 1:
• Serial 1 is the DB-9 connector.
Note:
The Pro has 2 serial connections. Serial 2 in the dropdown list is to support those sensors.
Default Setting Attribute
115200 Baud Rate
8 Data Bits
None Parity
1 Stop Bit
None Flow Control
To setup a serial connection:
1. Click on the System button in the Main Menu toolbar to bring up the System Setup window.
2. Click on the Communication tab.
3. Choose Serial 1 from the Connection drop-down list of the Communication Tool Setup field.
Banner Engineering Corp. Minneapolis, MN USA 322
2/2010 Communication Tool Setup