Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 253)

Description Values Option Name
This option is a mechanism for
adding characters after a string of
data.
User-defined ASCII characters (limit
of 75 characters)
End String
Note:
ASCII Hex characters are
allowed. Special symbols such
as \r, \n, and \t will cause a
carriage return, new line, and tab
to be output repsectively.
Check this box to add a label to the
data before the data itself. Example:
Parameter labels Enable Labels
Dark Count = 3, where "Dark
Count=" is the label.
4. Set conditions for conditionally exporting the selected data (in the Output Filter field).
• Select Pass to export the selected information on a passing Test tool.
• Select Fail to export the selected information on a failing Test tool.
Communication Tool Exportable Results
The Communication tool sends out the data in the same sequence that the tools appear in the inspection, and the result
of transmitting this data will increase the inspection time.
The following shows the data sent out for each Communication tool.
Description Value Result
Checks the connection (Ethernet only). 1 = The connection is valid, and data
will be sent.
Success
Processing time for the Sensor to send
the data out.
Given in ms. Execution time
The table below shows the format of the data.
Example Format Number Result*
(23.41, 156.52) (0.00, 00.00) Decimal Point (X,Y)
99.00 00.00 Decimal Distance
4 0 Whole Count
* Available data is tool and model-dependent.
Location Tools
•
Communication Tool Exportable Results: Locate Tool
on page 254
•
Communication Tool Exportable Results: Geometric Find Tool
on page 254
•
Communication Tool Exportable Results: Pattern Find Tool
on page 255
Gray Scale Tools
•
Communication Tool Exportable Results: Blob Detect Tool
on page 255
•
Communication Tool Exportable Results: Edge Tool
on page 256
•
Communication Tool Exportable Results: Geometric Count Tool
on page 256
•
Communication Tool Exportable Results: Object Tool
on page 257
253 Minneapolis, MN USA Banner Engineering Corp.
PresencePLUS Software Tools 2/2010