Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 251)

Format
This field provides options for formatting the ASCII string of data that will be exported.
Output Filter
This field provides a means to make specific output selections in order to avoid unwanted output information.
Guidelines for Configuring the Communication Tool
There are four main steps in configuring the Communication tool:
1. Select the Vision tools and their results to export (in the Select field).
• When a tool is selected, the selected tool’s tab appears in the Configuration window.
• Click on the tab to select the data to be exported.
2. Select the communication connection(s) that will export the data (in the Connection field).
• If MULTIPLE is chosen from the drop-down list, then click Edit Selections to select more than one port.
• Click View Settings to display the configuration of the connection.
• Data can be sent through 11 different communication connections: one connector for the serial connection, and
10 sockets (1 to 10) through the Ethernet connector.
• The 10 Ethernet sockets are comprised of the Sensor IP address and port number. The table below lists the default
Ethernet socket addresses.
Port Default IP Address Socket
20,000 192.168.0.1 1
20,001 192.168.0.1 2
20,002 192.168.0.1 3
20,003 192.168.0.1 4
20,004 192.168.0.1 5
20,005 192.168.0.1 6
20,006 192.168.0.1 7
251 Minneapolis, MN USA Banner Engineering Corp.
PresencePLUS Software Tools 2/2010