Other playback features – Banner PresencePLUS Pro COLOR—PROII Camera User Manual
Page 352
1. Load INP file. In Playback mode the vision sensor will be running off of stored images. These images will need
to be evaluated in some way, using vision tools, etc. To begin the Playback process, load an INP file as if you are
going to run the inspection on live images. When you get to the Run screen, however, hit Playback instead of Start.
2. Make a Playback List. At the bottom of the Playback screen is a box entitled Playback List. This is where you can
see the collection of image files the Player will be feeding to the sensor. To add a new BMP file to the Playback
List, click the plus button . This will bring up the Add Image(s) window allowing you to find the relevant files on
your computer.
3. Click the Play button. Once the Playback List is populated with image file(s), the Play button becomes active.
When the Play button is clicked, the Play button becomes to the Pause button and the images in the Playback List
are nspected. Press the square Stop button or the Pause button to stop.
Other Playback Features
After files have been added to the Playback List, a couple of buttons become active:
• The minus button is used to remove the currently selected bitmap from the list.
• The Clear All Images button is used to erase all of the files on the list.
There are two Playback modes possible:
• Single Play Mode (the default). In this mode, the Player will run through all the files on the Playback List once and
then stop.
• Repeated Play Mode is entered by clicking on the Single Play Mode button. Repeated Play puts the Player into a
continuous loop inspecting the files on the Playback List over and over until the Stop or Pause buttons are clicked or
the mode is changed back to Single Play.
Instead of running through all the files on the Playback List as fast as possible, the Player can be made to step through
each image individually. Clicking on the file name in the list runs the inspection file once on that image. Using the
Forward or Back buttons will allow you to step through the images one at a time.