Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 171)

7.3.8 Pattern Count Tool
The Pattern Count tool locates a pattern within a reference image, using and uses that pattern as a reference pattern
to locate the same pattern in new images. A reference pattern is stored in memory. The tool searches for patterns that
are very similar to the reference pattern. All patterns that match the reference pattern are counted and the center of the
fi
rst pattern found is determined. The location of the first pattern found is returned to the user. This information can
be used to measure distances and angles. The reference pattern is remembered by the sensor in full gray scale detail,
so the tool can find patterns in various light levels.
Usage
• Verify fabric patterns
• Verify date/lot codes
• Inspect electronic component assembly
Fields
The following are fields on the Pattern Count tool Input tab:
•
Enabling Remote Teach
on page 303
•
Rotation Enabled
on page 173
•
Minimum Acceptance Level
on page 173
•
Patterns
on page 173
•
Selected Pattern
on page 174
•
Results
on page 174
Supported Platforms
BCR/BCR
1.3 GEO/GEO
1.3 EDGE/EDGE
1.3 AREA/AREA1.3 OMNI/OMNI
1.3 OMNI
Color ProII/ProII
1.3 ProII Color
No No No No Yes Yes Yes Yes
Pattern Count Input Tab
171 Minneapolis, MN USA Banner Engineering Corp.
PresencePLUS Software Tools 2/2010