Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 372)

14.6 Mounting the Light Source
The light source must be securely mounted. Any movement in the light source during an inspection could affect
inspection performance.
14.7 Installing the Camera Lens
Remove any protective caps from the camera and lens. Turn the metal lens base clockwise to thread the lens onto the
camera. The plastic lens shroud is used for focusing; do not turn it when installing the lens.
14.8 Installing Lens Filters
These instructions are for Banner filters designed to fit Banner cameras.
Colored, infrared, and polarized lens filters can be used. The filter fits between the lens and camera and is held in place
with a retainer ring. Use the retainer ring tool that is supplied with the filter to add or remove a filter.