Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 91)

6.9 Start-Up Inspection Tab
The options on the Start-Up Inspection tab:
• Click on Setup Mode if you want the camera to start in Setup Mode after it is powered down.
• Click on Inspection Name, and select an inspection from the drop-down list to have the sensor start up to run.
• Product Select lines (ProII Only)
Start-Up Inspection Tab
P4 Start-Up Inspection Tab
ProII Start-Up Inspection Tab
91 Minneapolis, MN USA Banner Engineering Corp.
System Setup Dialog 2/2010