Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 321)

Chapter 8 Communication Tool Setup
To set up the Communication tool, click on the System button in the Main Menu toolbar to bring up the System Setup
window, then click on the Communication tab.
8.1 Ethernet Connection
In order to establish an Ethernet connection , the external device must be directed to the correct IP address and the
correct TCP port. In TCP/IP protocol, a TCP port number is used with the IP address to identify a specific path or
socket. The sensor has sockets 1 to 10, and can send out unique sets of data to 10 different devices.
Valid user TCP/IP port numbers are in the range of 1024 through 65535. The PresencePLUS GUI provides automatic
notification if you attempt to use a reserved port.
To view an Ethernet connection:
1. Click on the System button in the Main Menu toolbar to bring up the System Setup window.
2. Click on the Communication tab.
3. Choose a connection from the fixed Connection drop-down list of the Communication Tool Setup field.
Each Ethernet socket has a unique TCP port number as shown below
321 Minneapolis, MN USA Banner Engineering Corp.