Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 54)

Serial Connection
The sensor has a single serial connection that you can configure, Serial 1:
• Serial 1 is the DB-9 connector.
Note:
The Pro has 2 serial connections. Serial 2 in the dropdown list is to support those sensors.
Default Setting Attribute
115200 Baud Rate
8 Data Bits
None Parity
1 Stop Bit
None Flow Control
To setup a serial connection:
1. Click on the System button in the Main Menu toolbar to bring up the System Setup window.
2. Click on the Communication tab.
3. Choose Serial 1 from the Connection drop-down list of the Communication Tool Setup field.
Note:
Because there is no flow control for the serial connections, the sensor wil not detect or log a lost or broken
connection
Banner Engineering Corp. Minneapolis, MN USA 54
2/2010 System Setup Dialog