Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 303)

Inputs
Choose previous tools or external inputs that need to be evaluated to pass the Test tool. When a tool is chosen, another
tab pops up in the Test tool window.
Note:
The tool to be evaluated must appear before the Test tool in the Navigation window.
Select Invert to invert the individual input. If the input is True, Invert reverses it to False. If the input is False, Invert
reverses it to True.
Enabling Remote Teach
The Remote Teach function is a method of remotely updating inspection parameters in Run mode. Vision tools and
Test tools can be selected to be taught or not taught. To remotely teach an inspection, the Remote Teach function must
be enabled on each tool to be taught.
Pass/Fail Contribution
Check this box if the Test tool will influence the Pass/Fail status of the inspection. Do not check this box if the overall
Pass/Fail status of the inspection is not dependent on the current Test tool. The Pass/Fail contribution influences the
following:
• Discrete output Pass
• Discrete output Fail
• Pass/Fail results counter
• Pass (Green) and Fail (red) LEDs on the Sensor
• Freezing an image on the video monitor
• Display options on the PC
303 Minneapolis, MN USA Banner Engineering Corp.
PresencePLUS Software Tools 2/2010