Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 70)

Main Tasks to Complete Step 4
3. Select Offset Only from the Tool List Filter drop-down menu.
4. Click the Next button to return to the Tools menu.
Note:
The X, Y and Rotation selections will default to GF_1.
Main Tasks to Complete Step 5
Add a Test tool
to
receive a positive
1. In the PresencePLUS GUI, click the Analysis Tools tab.
2. Click the Test tool button.
confirmation that the
3. Select Coordinate Tool (COORD_1) from the Input 1 drop-down list.
Banner Engineering Corp. Minneapolis, MN USA 70
2/2010 System Setup Dialog