Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 95)

6.12.1 Standard Mode
Choose this option to reset all tool configuration settings for the connected sensor to the factory defaults.
6.12.2 Enhanced Mode
Choose this option to enable all tools and all tool's enhanced features for the connected sensor.
6.12.3 Custom Mode
Choose this mode to customize the tools configuration settings within the tree view. This mode is automatically selected
when changes are made to the tree view.
The Tool Configuration settings will only affect the sensor that the PresencePLUS software is connected - these settings
are stored with the sensor. Therefore, if the PresencePLUS software connects to a different sensor, then that sensor's
tool configuration will be reflected within the PresencePLUS software.
This feature is available when connected to sensors with 2008R1 or newer versions of firmware.
95 Minneapolis, MN USA Banner Engineering Corp.
System Setup Dialog 2/2010