Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 207)

You can also change the ROI width:
• By changing the value in the ROI Width field.
• By clickin on the lines that define the ROI width, and dragging to modify the width.
One-Shot
Once an ROI has been defined and terminated, the software performs a one-shot analysis of the existing image. The
software sends the values of all the input parameters to the sensor where the sensor performs analysis on the reference
image with those values, and computes initial values for number of good, narrow, and wide regions as well as other
characteristics of the regions.
Bead Tool Inputs
Bead Type
From the drop-down list, select Dark Bead or Bright Bead as appropriate for your application.
Threshold
Type
207 Minneapolis, MN USA Banner Engineering Corp.
PresencePLUS Software Tools 2/2010