Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 59)

Comments Optional
Qualifiers Required
Qualifiers Support Actions Object or
Activity
Identifier System Object,
Component, or
Activity
Get the camera
exposure
None Positive Number
SET EXPOSURE
Exposure
Enables frame
number as
None
ENABLE SET FRAMETAG
Frame Number
Tag
command
acceptance
indicator
Disables frame
number as
None
DISABLE SET FRAMETAG
Frame Number
Tag
command
acceptance
indicator
Retrieve the status
of the frame tag
indicator
None None
GET FRAMETAG
Frame Number
Tag
Coordinate tool
Commands
Description Syntax
Returns the specified Coordinate tool output. set coordtool tool_name|tool_number x\y|angle
Gets the value get coordtool tool_name|tool_number x\y|angle
Math tool and the Remote Command Channel
Commands
Description Syntax
Sets the specified tool operand, if it is a constant.
Value should be a floating number.
set mathtool tool_name|tool_number value operand_1|operand_2
Gets the value of the specified tool operand, if it
is a constant.
get mathtool tool_name|tool_number operand_1|operand_2
String tool
Commands
Description Syntax
Sets the specified tool operand, if it is a constant.
Value should be a quoted string (see
Character
Strings
on page 331).
set stringtool tool_name|tool_number operand_1|operand_2 value
Gets the value of the specified tool operand, if it
is a constant.
get stringtool tool_name|tool_number operand_1|operand_2
59 Minneapolis, MN USA Banner Engineering Corp.
System Setup Dialog 2/2010