Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 96)

6.12.4 Tool Licensing
Some tools (e.g., barcode and OCR/OCV) require a license to be registered within the sensor before they can be
activated. To purchase a license key, contact Banner with the following information:
- MAC address of the sensor you wish to license
- Product Type of the sensor
- The tool(s) you wish to purchase licenses
- Your company information
- An e-mail address to receive the Key
Please use caution when providing this information, as a license issued for one sensor cannot be registered on a different
sensor.
After receiving a license key, you may register the license key using two different methods:
Method 1 - Use the Firmware Updater (recommended)
- Run the Firmware Updater - version 2.0.4 (2008R1) or newer
- Select the 'Licensing' tab
- Connect to the sensor with the MAC address used for key
- Enter the license key received for the sensor - or browse for the license file
- Click on the 'Register' button
- If necessary, select the 'Update' tab and update the firmware to the latest version
Method 2 - Use the PresencePLUS GUI software
(Use this method if sensor has latest version of firmware)
- Start the PresencePLUS software - version 3.2.0 (2008R1) or newer
- Connect to the sensor with the MAC address used for key
- Click 'System' on the title bar and then select the 'Tool Configuration' tab
- Select the tool to activate
- Enter the license key received for the sensor
- Click on the 'Register' button
To view licenses currently registered within the sensor, click the 'Help' button on the title bar and select 'About' from
the menu. The licenses are also displayed next to the product name in the title bar.