Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 252)

Port Default IP Address Socket
20,007 192.168.0.1 8
20,008 192.168.0.1 9
20,009 192.168.0.1 10
• The serial port is the RS-232 connector (Pins 1, 9, and 10) on the Sensor. The deafult settings for the serial port
are listed below.
Default Setting Attribute
115200 Baud Rate
8 Data Bits
None Parity
1 Stop Bit
None Flow Control
3. Format the ASCII string of data (in the Format field).
• Choose a Delimiter and Start and End strings.
• Check the Enable Labels box to add the names for data being sent.
Allowable ASCII string options are shown below.
Note:
Start and End strings can now accept ASCII Hex values, and the following special characters: "\r",
"\n", "\t".
Description Values Option Name
The delimiter is used to separate the
individual pieces of data being sent.
, <Comma>
: < Colon> Delimiter
The delimiter will follow every
; <Semicolon> individual segment of data, including
start string and end string.
\r\n <CR_LF> Carriage return and
then line feed
\n\r <LF-CR> Line feed then carriage
return
\r <CR> Carriage return only
\n <LF> Line feed only
This option is a mechanism for
adding characters before a string of
data.
User-defined ASCII characters (limit
of 75 characters)
Start String
Note:
ASCII Hex characters are
allowed. Special symbols such
as \r, \n, and \t will cause a
carriage return, new line, and tab
to be output repsectively.
Banner Engineering Corp. Minneapolis, MN USA 252
2/2010 PresencePLUS Software Tools