Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 66)

Main Tasks to Complete Step 2
Presence
PLUS Sensor
supports
3. Click on the System button in the upper right corner of the PresencePLUS GUI to display
the System Setup screen.
user-assignable TCP 4. Click on the Communication tab to display the Communication configuration dialog.
/IP ports. This
assignment is
performed from the
System Setup Dialog,
Communications tab
The default Ethernet port assignments are from 20000 to 20009.
Note:
Valid user TCP/IP port numbers for PresencePLUS sensors are in the range of 1024 through 65535. The
Presence
PLUS GUI will provide automatic notification if an attempt to use a reserved port is made. Any changes
to the port assignment must be reflected in the AS Language program included in this document .
Main Tasks to Complete Step 3
Configure the
PresencePLUS
1. Click on the RCC Protocol drop-down menu, and select "Kawasaki" from the menu.
The default protocol configuration for Kawasaki robot is displayed.
Remote Command
Channel (RCC)
Banner Engineering Corp. Minneapolis, MN USA 66
2/2010 System Setup Dialog