Banner PresencePLUS Pro COLOR—PROII Camera User Manual
Page 350
There are three steps to recording bitmap images using this feature:
1. Choose a Record Path. At the top of the tab, at the end of the line labeled Record Path, click the button. This will
open up the Record to… window allowing you to browse for the folder where you want the images to be saved.
2. Choose a Record Mode. Right beneath the Record Path selection is the Record Mode drop down menu. This is
where the user selects the conditions (if any) for saving images. The choices are similar to those for the Logging
feature.
3. Press Record. After choosing which images to save and where to save them, the last step is to press the red Record
button found midway down the page. As the images are saved, the file names will appear in the Playback List
window. Press the record button or the square Stop button to stop recording.
Banner Engineering Corp.
Minneapolis, MN USA
350
2/2010
Run Screen