Operator’s manual – Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 User Manual
Page 100
Advertising
OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
92 / SYSTEM CONFIGURATION
7. To change the valve position, press the Increment or Decrement
buttons repeatedly until the desired minimum or maximum output value
is reached.
8. Press the Start button and the valve calibration will immediately begin.
The calibration will run using the new max flow value.
Advertising
This manual is related to the following products: