Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 35)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
SYSTEM MODES / 27
TURN ON/OFF CHANNEL
The Turn On/Off Channel buttons turn the active channel ON and OFF,
respectively. Channels that are set to OFF will not operate when the master
switch is set to the ON position. Turning a channel OFF is not the same as
disabling a channel in Channel Setup Mode. The active channel is
displayed in the button text. If the key text is OFF, this is the action that will
be performed when the key is pressed.
SUMMARY
The Summary button accesses the Summary screen and provides an
overview of system configurations for enabled channels. Specific setup
screens can be accessed (Level 2 and 3 Users only) by pressing inside the
yellow boxes for Channel, Material, Row, Module, Speed Set, and
Accessory Sensor screens.