Default, Operator’s manual, Up down default clear ok – Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 User Manual
Page 129: Cancel
OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
SYSTEM CONFIGURATION / 121
Figure 77
Auxiliary Input/Function Setup Screen
3. Navigate to the configuration screen by pressing the Auxiliary Input
Setup button.
4. Press the Default button. A Master Switch Connection icon will appear
on the screen indicating that the master switch is to be connected to
the tractor cab harnesses’ master switch connector (refer to
(
Figure 78
).
5. Press the OK button to save the configuration and return to the Aux
Input/Function Setup screen.
6. Press and hold the ESC button for one or more seconds to return to
the Virtual Terminal Setup screen.
Figure 78
Aux Input Configuration Screen
2
4
4
2
2
1
2
3
2
4
4
2
2
1
2
3
Cancel
X
PDC
Aux Input
Setup
softkey
Default
Up
Down
Default
Clear
OK
The Master Switch Connection
icon may appear automatically on
this screen, or may appear after
the DEFAULT softkey has been
pressed.
Aux
Cancel