Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 97)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
SYSTEM CONFIGURATION / 89
DISABLE CONTROL ON CONTROL FAILURE ALARM
The setting for Disable Control on Control Failure Alarm shuts down ALL of
the active control channels if the RPM sensor fails.
• ENABLED setting shuts down the control channels when the RPM
sensor fails
• DISABLED setting disables the function. All non-RPM control channels
continue to operate with a failed RPM sensor.