Operator’s manual, Type – Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 User Manual
Page 43
Advertising
OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
SYSTEM CONFIGURATION / 35
Figure 24
Edit Material Name at Material Setup Screen
Figure 25
Material Setup screen
TYPE
Type establishes the desired type of application control channel used for a
specific material. This step is very important. The Material Type must
correctly match the Control Type for material selection from the
Control Setup screen to operate properly.
Material Name
input box
MATRL 2
Create Material
Name
Advertising
This manual is related to the following products: