Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 120)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
112 / SYSTEM CONFIGURATION
LOW ALARM DELAY
The Low Alarm Delay establishes the delay between the detection of a low
pressure alarm condition and the resulting alarm display. The value is
entered in seconds.
PRESSURE FILTER
The Pressure Filter value filters the signal out of the pressure sensor.
Typically no filtering is required and therefore the standard value is set at
0%. If the pressure readout on the Main Work screen is oscillating in excess
of 10%, increasing the filter value filters the signal to reduce the oscillation.
For a true pressure value this number should be set to 0%.