Operator’s manual – Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 User Manual
Page 32
OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
24 / INSTALLATION
HOPPER LEVEL SENSORS
The system is compatible with the DICKEY-john planter hopper level
sensors. One hopper level sensor can be connected to the actuator
harness and another 4 hopper sensors can be connected using an
additional harness. Both harnesses are connected to the WSMT. Hopper
level connections are labeled HOPPER 1, 2, 3, etc.
RPM/FAN SENSORS
The system is compatible with all existing DICKEY-john digital Fan/RPM
sensors. One Fan/RPM sensor can be connected to the WSMT module.
The sensor is connected to the actuator harness. The Fan/RPM sensor
connection is labeled RPM 1.
AIR PRESSURE SENSORS
The system is compatible with DICKEY-john air pressure sensors. One air
pressure sensor with adapter harness connects to the RPM harness
connection labeled RPM 1.