Operator’s manual – Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 User Manual
Page 23
Advertising
OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
INSTALLATION / 15
NOTE: The last module harness in the
system must have a CAN
Terminator installed for proper
system operation. Refer to
Implement Harness (
Figure 13
)
or (
Figure 14
) for additional
information.
IMPORTANT: Be sure the locking tabs engage when inserting the
connectors. The connection is sealed only when the
locking tabs have fully engaged.
Advertising
This manual is related to the following products: