Operator’s manual, Cab harness connections, 16 / installation – Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 User Manual
Page 24
Advertising
OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
16 / INSTALLATION
CAB HARNESS CONNECTIONS
The following diagrams illustrate cab harness layout and connections for
DICKEY-john 5” and 10” Virtual Terminals.
Figure 13
Cab Harness Layout and Connections (5” Virtual Terminal)
Chassis
Ground
CAN
Terminator
467980126
Ignition
Connect to switched
+12VDC
NOTE: This wire
must be connected to
switched +12VDC
Master
Switch
467980124S1
+
-
To Implement CAN
Harness
System Power Harness
467980455
Battery
Tractor
Harness
467980452
CFM (optional)
Virtual
Terminal
467980501
Radar Speed Sensor
(if not connected to WSMT)
Advertising
This manual is related to the following products: