Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 138)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
130 / DATA ITEMS
SPACING MIN ROW
Spacing Min Row displays the seeding row with the minimum spacing in
inches (cm). The value to the left side displays the current row number. The
value on the right is the spacing. This Data Item displays on an entire
row of the Work screen.
SPACING MAX ROW
Spacing Max Row displays the seeding row with the maximum spacing in
inches (cm). The value to the left side displays the current row number. The
value on the right is the spacing. This Data Item displays on an entire
row of the Work screen.
SPACING AVG
Spacing Avg displays the average spacing in inches (cm) of all active
seeding rows per channel.
NOTE: All Data Items are selected
from the Work Configuration
screen. Refer to the Work
Screen Configuration section
for setup instructions.
SEED/DISTANCE ROW SCAN
Seed/Distance Row Scan displays all active seed rows and the number of
seeds per foot (seeds/meter) for each row detected by the sensors. The
value to the left side displays the current row number. The value on the right
is the seeds per distance data. The scan continues sequentially in
four-second intervals unless a particular row number is selected for
continuous view. This Data Item displays on an entire row of the Work
screen.
SEED/DISTANCE MIN MAX ROW SCAN
Seed/Distance Min Max Row Scan alternately displays the seed row with
the minimum number of seeds per foot (seeds/meter) and the seeding row
with the maximum number of seeds per foot (seeds/meter). The value to the
left side displays the current row number. The value on the right is the
seeds per distance data. Dwell time for each display is four seconds. This
Data Item displays on an entire row of the Work screen.
0 . 0 1
S
IN
S
IN
0 . 0 1
S
IN
S
IN
0 . 0
S
IN
0 . 0
1 S
FT
0 . 0
FT
S 1
FT
S