Operator’s manual, Control rate channels 1-4, Control scan – Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 User Manual

Page 136: Pop row scan, Pop min max row scan

Advertising
background image

OPERATOR’S MANUAL

IntelliAg PDC User 2 & 3

11001-1501-200811

128 / DATA ITEMS

CONTROL RATE CHANNELS 1-4

Control Rate Channels 1-4 display the channel actual application rates
depending on channel setup. The channels calculated flow rate displays.
When the master switch is OFF, the rate displays in a small font. When the
master switch is ON, the rate displays in a large font. When the channels
target rate is adjusted using the Inc/Dec or Preset Table Rate function, the
new target rate is displayed for 5 seconds followed by the actual rate. This
Data Item will display on an entire row of the Work screen.

CONTROL SCAN

Control Scan displays all active control channels sequentially showing the
actual rate in its respective units depending on channel setup, and the Inc/
Dec value or preset table rate for each channel in five-second intervals.
This Data item will display on an entire row on the Work screen.

POP ROW SCAN

NOTE: All Data Items are selected

from the Work Configuration
screen. Refer to the Work
Screen Configuration section
for setup instructions.

Pop Row Scan displays all active seed rows population in seeds per acre
(or seeds/Ha) for each detected seed sensor. The value to the left side
displays the current row number being scanned. The value on the right is
the population data. The scans continue sequentially in four-second
intervals unless a particular row number is selected for continuous view.
This Data Item will display on an entire row of the Work screen.

POP MIN MAX ROW SCAN

Pop Min Max Scan alternately displays the seeding row with the minimum
population and the seeding row with the maximum population in seeds per
acre (or seeds/Ha). The value to the left side displays the current row
number. The value to the right is the population data. Dwell time for each
display is four seconds. This Data Item displays on an entire row of the
Work screen.

40.5

AC

0.0

SEC

C O R N

CH1

S

40.5

KS

AC

0.0

SEC

AC

N I T R O G E N

98.1

LBS

AC

CH2

Rate 1

0 . 0

5

KS

AC

0 . 0

3

AC

KS

AC

KS

Advertising
This manual is related to the following products: