Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 93)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
SYSTEM CONFIGURATION / 85
SPREADER CALIBRATION - GRAN SEED
MONITOR AND GRAN FERTILIZER MONITOR
The Spreader Constant Calibration screen performs a catch test to
determine the spreader constant. This button is only available for granular
seed and fertilizer applications.
Press the Spreader Calibration button to access the Spreader
Calibration screen.
Figure 52
Spreader Calibration - Granular Seed Monitor
When the START key is engaged, the machine will become
operational. All necessary precautions must be taken to ensure
user safety. Failure to practice all necessary caution may result in
serious injury or death.
Hoppers must contain material. Be prepared to catch the material
in a container so it can be weighed at the end of the calibration.
DENSITY
Relative granular density as represented by the weight of product per
volume. If not known, enter a value of 1. (Lbs/ft
3
, Lbs/bu.)