Operator’s manual, Autopilot steering navigation, Accumulators – Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 User Manual

Page 149

Advertising
background image

OPERATOR’S MANUAL

IntelliAg PDC User 2 & 3

11001-1501-200811

SYSTEM OPERATION / 141

The following symbols illuminate in the bar graph area:

Figure 85
Row Indicator Symbols

AUTOPILOT STEERING NAVIGATION

Autopilot Steering Navigation can be engaged and disengaged from the
Main Work screen and displays swath # (AB0), cross-track error (0.00 IN),
age of correction (0.0 SEC), heading direction (360 degrees), and % swath
complete.

ACCUMULATORS

Some Data Item values can be reset to zero from the Main Work screen. An
accumulator displays (e.g., Area 1 Field, Seed Count, etc.) on the active
screen and can be reset to zero by placing a check mark in the box next to
the data item. Only accumulators on the currently-displayed screen can be
reset. Accumulators are reset independently and can only be reset when
the master switch is OFF. Once an accumulator has reached its maximum
value, it will roll over to 0.0.

POPULATION ROW SCAN

Pop Row Scan displays all active seed rows population in seeds per acre
(or seeds/Ha) for each detected seed sensor. The value to the left side
displays the current row number being scanned. The value on the right is th
epopulation data. The scans continue sequentially in four-second intervals
unless the rotary knob is used to select a particular ro wnumber for
continuous view. This Data Item displays on an entire ro wo fthe Work
screen.

SINGULATION AVERAGE POPULATION

Singulation Average displays the average percent seed singulation of the
rows that are configured for population. Singulation refers to the portion of
seeds planted individually, rather than in groups.

MATERIAL NAME

Active Material Name for a control channel created at the Control Channel
screen.

1

Row assignment
to channel

Planting at
desired rate

High Population

Low Population

Row Failure

X

Row off manually
or pattern

Blockage

Not planting
Master Switch off

!

Row off by control
and seeds detected

Row
Off

Off

Press to engage and
disengage

3

0 . 0 0

AC T

Reset box

0 . 0

5

KS

AC

0 %

MATRL 1

Advertising
This manual is related to the following products: