Setting a sensitivity, Setting a sensitivity -56 – KEYENCE IV Series User Manual
Page 124
Advertising

4-56
- IV Series User's Manual (Monitor) -
z
Setting a sensitivity
According to the target, perform the following
procedures when the extraction sensitivity of an
outline is selected.
1
Tap the [Fine Tune Outline] button.
The outline
cannot be
extracted
The Settings Navigator guide opens.
Tap the [OK] button.
2
Select the extraction sensitivity of an outline.
Select [High] in this section.
3
After the setting is completed, tap the [OK]
button.
Extracted
outline
The system returns to the main screen for the
Position Adjustment tool settings.
1. Image Optimization
2. Master Registration
3. Tool Settings
4. Output Assignment
Outline tool
Color Area/Area tool
Position Adjustment tool
Extended functions
4
Settings Navigator (Setting the Judgment Condition)
Advertising