KEYENCE IV Series - Manual (Page 84)

4-16 - IV Series User's Manual (Monitor) -
Extended functions for the Image Optimization
Adjust the Image Optimization in the extended functions menu.
Items of extended functions for the Image Optimization
Items Description Setting range
Default
value
Imaging
Area
Sets the imaging area (image
size of the sensor). When the
imaging area is reduced, the
shutter speed and judging
process become faster.
y Entire
Sets the field of view of the imaging area for
the sensor to the entire area.
y Partial
Edit a tool window and set an arbitrary area in
the sensor's field of view as an imaging area.
Entire
Advanced
Brightness
Adjustment
Bright
Adjusts the brightness of an
image manually.
Standard range type (color) 1 to 100
20
Standard range type (monochrome) 1 to 120
Short range type
1 to 120
Long rang type 1 to 100
Imaging Mode
Selects imaging mode for
sensor.
y Normal
This mode is the basic imaging mode. The
target can be imaged with less noise.
y HDR
Select to image a target such as a metal that
reflects light and has high contrast.
y HighGain
Select to shorten the exposure time and when
the imaging environment is in a dark place.
Lowers imaging quality due to high gain.
Normal
Lighting Selects lighting mode for built-in
light.
y OFF
Turns OFF the built-in light.
y Flash
The built-in light lights within the exposure
when imaging.
y Continuous
The built-in light lights continuously regardless of
specified exposure time when imaging a target.
Flash
Color
Filters
Applies color filters if the outline
of a certain color cannot be
displayed when the image is
displayed in monochrome by a
color type sensor.
(Color type only)
OFF/Red/Green/Blue/Cyan/Magenta/Yellow OFF
Digital
Zoom
Switches digital zoom ON/OFF.
Images by magnifying the center
field two times. The field of view
of horizontal and vertical sides
will be a half size.
(Monochrome type only)
ON/OFF OFF
Trigger Options Auto Brightness Adjustment Focus Adjustment Extended functions
1. Image Optimization 2. Master Registration 3. Tool Settings 4. Output Assignment
4
Settings Navigator (Setting the Judgment Condition)