KEYENCE IV Series - Manual (Page 40)

2-8 - IV Series User's Manual (Monitor) -
Mounting the Monitor
Mounting to a wall
Use the wall mounting adapter (accessories or OP-
87464).
Hang it on the hook with the wall mounting adapter
mounted to the monitor, or mount the monitor to the
wall mounting adapter mounted on the wall.
Hanging on the hook
For operation take the monitor from the hook and
operate it while holding it in your hands.
1
Mount the monitor to the wall mounting
adapter by aligning the stopper of the wall
mounting adapter to the groove on the
rear monitor.
Slide the monitor down all the way, and confirm
that the monitor is locked.
Stopper
2
Hang the monitor on the hook.
Mounting with the wall mounting
adapter
The monitor can be operated by the following
methods.
y Unhang to pick up the monitor from the hook and
operate it.
y Operate it while mounted on the wall.
1
Mount the wall mounting adapter to the wall.
z z Mounting by creating a screw hole in the wall
y Screw : M3 x 2
Use commercially available screws.
y Tightening torque : 0.27 to 0.33 N·m
z z
Mounting by creating a plated through
hole on the panel
y Screw : M3 x 2, Nut : M3 x 2
Use the attached screws and nuts.
y Tightening torque : 0.27 to 0.33 N·m
Mounting the Monitor
2
Installation and Connection