KEYENCE IV Series - Manual (Page 64)

3-14 - IV Series User's Manual (Monitor) -
Basic Operation for the Monitor
Editing the value with the slider
The value of a trigger interval and the threshold of
each tool can be edited.
This section explains how to edit the value with
the slider using an example of a trigger interval in
[Internal].
1
In the Image Optimization settings of
the Settings Navigator, tap the [Internal]
button in [Trigger Options].
The slider appears on the monitor.
2
Set the trigger interval.
z z
Setting by the slider
Touch the slider, and then slide it to the right or
left to set the trigger interval. According to the
slider position, the value of a trigger interval is
updated.
Slide the slider to the right or left
The value
is updated
according to the
slider position
z z Setting by the [+] / [-] button
By tapping the [+] / [-] button, the value of a
trigger interval increases or decreases (slider
slides in accordance with the value changed).
The value
is updated
according to the
slider position
Tap the [+] / [-] button to slide the
slider
For the slider which sets both upper and lower
limit, select the slider to be set and tap the [+] /
[-] button to set it.
z z
Setting by inputting a value
By tapping the ▼ button of the trigger interval,
the screen to input a value opens.
Input the value of a trigger interval and tap the
[OK] button.
Tap the ▼ button
Input the value
of a trigger
interval
y By tapping the button, the value can be
reset to 0.
y By tapping the button, the last number
can be deleted.
Basic Operation for the Monitor
3
Basic Operation