KEYENCE IV Series - Manual (Page 81)

4-13 - IV Series User's Manual (Monitor) -
5
Adjust the focusing position as needed.
z z When the focusing position is to be
adjusted automatically again
When the [Auto] button is tapped, the focusing
position is adjusted automatically again.
z z When the focusing position is to be
adjusted manually
Adjust the focus by the slider.
For details of settings by using the slider, refer to
“Editing the value with the slider” (Page 3-14).
z z
When multiple focusing positions exist
When there are multiple positions that can be
focused, the sensor adjusts to the closest position
to the sensor. The options of the position that can
be focused will be indicated with ( ) mark.
To change the focusing position to the optional
position, tap the [Next Pos] or the options ( ) of
the focusing position.
6
After the setting is completed, tap the [OK]
button.
The system returns to the main screen for the
Image Optimization.
When the [Cancel] button is tapped, the focus
will be reset to the previous position.
y During the auto adjustment, the sensor
automatically images a target by inputting the
internal trigger regardless of the Trigger Options
settings (Page 4-8). Also, when the continuous
lighting (Page 4-18) is set, the sensor images
with the flash lighting.
y The auto adjustment searches the positions that
can be focused over the entire area regardless
of the imaging area settings (Page 4-17).
Trigger Options Auto Brightness Adjustment Focus Adjustment Extended functions
1. Image Optimization 2. Master Registration 3. Tool Settings 4. Output Assignment
4
Settings Navigator (Setting the Judgment Condition)