KEYENCE IV Series - Manual (Page 45)

2-13 - IV Series User's Manual (Monitor) -
Cables
Wiring
color
Name
Assigning
default value
Description
Brown DC24V - + side of power
Blue 0V -
- side of power
GND of input-output cable
Black OUT1 Total Status (N.O.) Output assignable function
y Total Status
y Tot. StatusNG
y RUN
y BUSY
y Error
y Pos. Adj.
y Judge result of each tool (Tool 1 to Tool 16)
y Logical operation result of each tool (Tool 1 to Tool 4)
y OFF (not used)
White OUT2 BUSY (N.O.)
Gray OUT3 Error (N.O.)
Orange OUT4 OFF
Pink IN1 External trigger ↑
Set external trigger.
Rising timing (↑) or falling timing (↓) can be set.
Yellow IN2 OFF
Input assignable function
y Program bit0 to bit4
y Clear Error
y Ext. Master Save
y OFF (not used)
Light Blue IN3 OFF
Purple IN4 OFF
Green IN5 OFF
Red IN6 OFF
Drain FG - Insulated frame
Cable specification y Brown/Blue/Black/White/Gray/Orange : AWG25
y Pink/Yellow/Light Blue/Purple/Green/Red : AWG28
y With braided shield cable (with drain cable)
y The output cable assignment can be changed.
“4. Output Assignment (Setting Details of Outputting to Output Line)” (Page 4-60)
y N.O./N.C. can be changed.
“Output Settings” (Page 6-27)
y The input cable assignment can be changed.
“Input Settings” (Page 6-26)
y Individually insulate the non-used input-output cables.
y For input cables of this sensor, connect with non-contact output (transistor output/SSR output).
For contact output (relay output), incorrect input may be operated due to the contact bouncing.
2
Installation and Connection