KEYENCE IV Series User Manual
Page 151
5-17
- IV Series User's Manual (Monitor) -
Tool Auto Tuning (Automatically Adjusting the Judgment Condition)
4
Select a starting method of Tool Auto Tuning.
z
z
Register from the beginning
Select this method in the following cases.
y
When performing Tool Auto Tuning for the first
time.
y
When redoing the image registration from the
beginning.
If the [Register from the beginning] is tapped,
the registration menu screen of Tool Auto
Tuning opens. Proceed to step 5.
If the previous registration information has been
saved in the monitor, a confirmation dialog
asking whether or not to discard the previous
registration information appears.
y
Tap the [OK] button if you wish to discard the
previous registration information and perform
Tool Auto Tuning.
y
By tapping the [Saving to the USB memory]
button, the result of Tool Auto Tuning can be
saved in the USB memory as a registration
information and can be reused.
z
z
Use the previous registered image
Select this method in the following cases.
y
When performing Tool Auto Tuning after
additionally adding a new image to the OK/NG
image registered in the previous Tool Auto Tuning
y
When readjusting the tool settings after Tool
Auto Tuning and then repeating the Tool Auto
Tuning by the registered image.
“Tool Auto Tuning by the previous registration
z
z
Use the registered information file
Select this method in the following cases.
y
When performing Tool Auto Tuning after
additionally adding a new image to the
registration information (images and criteria
information) saved in the USB memory
y
When performing Tool Auto Tuning using the
registration information (images and criteria
information) saved in the USB memory after
readjusting the tool settings
“Tool Auto Tuning by the registration
5
Select the registration source of the image
to be registered to the Tool Auto Tuning
and register the image.
z
z
For registration of an image taken during
the Test mode
“Registering the images taken in the Test
z
z
For registration of an image history saved
in the sensor
“Registering the images from the image
history saved in the sensor” (Page 5-20)
z
z
For registration of an image file saved in
USB memory
“Registering the images from the file saved
in the USB memory” (Page 5-22)
5
Operating/Adjusting