KEYENCE IV Series - Manual (Page 205)

6-29 - IV Series User's Manual (Monitor) -
Setting the Extended Functions of the Sensor
Device settings
Sets the sensor name and password lock.
1
Tap the [Sensor Advanced] button in the
Sensor Setup Menu screen.
2
Tap the [Environmental] button, and then
the [Device Name/Pass] button.
3
Set the device settings of the sensor.
“Device Name” (Page 6-29)
“Password Lock” (Page 6-30)
4
After the setting is completed, tap the [OK]
button.
The system returns to the Sensor Advanced screen.
Device Name
The sensor can be arbitrary named and controlled.
When the [Edit] button is tapped, the dialog to enter
a device name opens.
Enter the arbitrary name and tap the [OK] button.
y If the display language (Page 6-51) is changed,
the device name might be replaced and
displayed as hyphens (-).
y To use the PROFINET function, use only “a - z”,
“0-9”, “-”, and “.”. For the setting details, refer to
“IV Series User’s Manual (Field Network)”.
y When you changed the device name while the
PROFINET communication is being used, the
sensor restarts.
For details of how to enter characters, refer to
“Inputting characters” (Page 3-16).
6
Useful Features/V
arious Functions